BSM170
Digital Stadiometer
Size:
- 390(W) X 500(L) X 2190(H) : mm
- 15.3(W) X 19.7(L) X 86.2(H) : inch
Quick Assembly
No complicated procedure is required for assembling BSM170. Simply link each components from bottom to top with a screw driver only, then you are ready to measure the height.
Simple Operation
Head bar, large LCD with bright backlight and two simple buttons are all you need for height measurement. Simply step on the footplate after turning on the device to start the measurement and lock the value so that you do not lose your data.
Bluetooth Compatibility
Use the measured height value for your body composition measurement. Simply connect the BSM170 and the Inbody, the professional body composition analyzer, via Bluetooth without any cable attached.
| Measurement Item | Height |
|---|---|
| Height Range | 35 ~ 210cm (1ft. 1.8in. ~ 6ft. 10.7in.) |
| Error range | ± 1mm |
| Minimum Measuring Range | 1mm |
| Display Type | Customized LCD 55*31 mm with Backlight |
| Unit | Cm, ft-in |
| Height offset | +-9.9 cm |
| Energy Saving | 150 seconds after the last measurement |
| Data Auto-lock | Maximum 10 seconds |
| Power Source | Bluetooth |
| Dimension | 390(W) X 500(L) X 2190(H): mm 15.3(W) X 19.7(L) X 86.2(H) : inch |
| Machine Weight | 8.5kg (18.7lbs) |
| Operation Environment | 10 ~ 40℃(50 ~ 104℉), 30 ~ 75%RH, 70 ~ 106kPa |
| Storage Environment | 10~70℃(14 ~ 158℉), 10~80% RH, 50~106kPa (No Condensation) |
| Setup | Data Hold, Beep Sound, LCD Backlight, Calibration, Measurement Unit, Height Offset, Reset |